Safety Information and Introduction
En-11
■ Aiming the remote controller
To use the remote controller, point it at the AV
controller’s remote control sensor, as shown below.
■ Installing the batteries
Note
• If the remote controller doesn’t work reliably, try replacing
the batteries.
• Don’t mix new and old batteries or different types of
batteries.
• If you intend not to use the remote controller for a long time,
remove the batteries to prevent damage from leakage or
corrosion.
• Remove expired batteries as soon as possible to prevent
damage from leakage or corrosion.
Remote control sensor
AV controller
Approx. 16 ft. (5 m)
Batteries (AA/R6)
To Next Page
Loading...
Need help?
General