Playback
En-42
■ Selecting Presets
■ Deleting Presets
You can listen to the audio of one input source while
watching the video of another. This function takes
advantage of the fact that when an audio-only input
source (BD/DVD, CBL/SAT, STB/DVR, Game1,
Game2, Phono, TV/CD, Tuner) is selected, the video
input source remains unchanged. The following
procedure shows how to listen to a CD player’s audio
source connected to TV/CD IN while watching a
Blu-ray Disc/DVD player’s video source connected to
BD/DVD.
Tip
• To use an input selector as audio-exclusive, you must
assign all video inputs to “-----” (➔ pages 61, 62).
4
Press Memory again to store the station or
channel.
The station or channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your favorite
AM/FM radio stations.
1
To select a preset, use Preset e/r on the AV
controller, or the remote controller’s CH +/–.
Tip
• You can also use the remote controller’s number
buttons to select a preset directly.
1
Select the preset that you want to delete.
See the previous section.
2
While holding down Memory, press Tuning
Mode.
The preset is deleted and its number disappears
from the AV controller’s display.
Playing Audio and Video from Separate
Sources
1
Press BD/DVD.
2
Press TV/CD.
The audio output changes to the CD source, but
the video of previously-selected BD/DVD is
retained.
3
Start playback on your Blu-ray Disc/DVD and
CD players.
You can now enjoy watching your Blu-ray
Disc/DVD with the sound of your CD player.
To Next Page
Loading...
Need help?
General