Playback
En-53
Turning Off the Components
This button turns off all components activated by the
Easy Macro mode.
First, the related components stop and turn off.
Second, the AV controller turns off. Finally, the TV
turns off (or enters standby mode).
*1*2
*1
This step doesn’t apply to My Music, with the default
settings.
*2
With some televisions, the power may not be turned off
(or enter standby mode).
Changing the Source Components
You can change the source components activated by
the Easy Macro mode.
Examples:
If you wished to use My Music to start the Integra/
Onkyo CD player, you would press and hold down
My Music (about 3 seconds) while holding down
TV/CD until it flashes twice.
Restoring Default
You can restore Activities to the default settings.
1
Press All Off.
1
While holding down Remote Mode for the
playback component you wish to assign,
press and hold down the Activities to be
changed (My Movie, My TV, or My Music)
(about 3 seconds).
Activities flashes twice, indicating that the
change is complete.
1
While holding down Home, press and hold
down All Off until All Off lights (about 3
seconds).
2
Release Home and All Off, and press All Off
again.
All Off flashes twice.
To Next Page
Loading...
Need help?
General