EasyManua.ls Logo

Intellian i3 - Operating the ACU - LNB Frequency Settings; Setting the LNB Local Frequency (Case 1)

Intellian i3
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 i3/i4 Satellite Antenna System Install and User Manual
1) Parameter Setting method
SCAN OFFSET The actual angle between the marked point on
the sub-reflector and the datum.
TRACK SCALE – To control the tracking speed while antenna is tracking
the satellite. High Track Scale value resulting in high tracking speed.
DETECT LEVEL The basic single detection level.
TRACKING LEVEL – The basic signal tracking level
EL ADJUST – The mechanical tolerance compensation of elevation limit.
WRS LEVEL The basic WRS detection level.
POWER THRESHOLD – The value to identify Vertical/Horizontal or
RHCP/LHCP.
DISEQC LEVEL The value to identify 22KHz tone.
OFFSET RH-LH – The difference value between RHCP/LHCP and
SCAN OFFSET.
USE WRS To apply WRS while antenna is searching for satellite.
OFFSET DIFFERENCE To apply Offset Difference.

Other manuals for Intellian i3

Related product manuals