Item Description
Select the IP source to
protect the port:
Select the port (or ports) that you wish to protect by IP Source Guard. The
example above shows that IP Source Guard is enabled for port 3. Note that IP
Source Guard isn’t supported on Trunk or aggregated ports.
Item Description
VLAN ID Specify the VLAN ID for the static entry. Leave 1 for the default VLAN.
Source IP Address Specify the IP address of the client for the static entry.
Source MAC Address Specify the MAC address of the client for the static entry.
Ports Select the port to which the client is connected (port 3 in the example above). You
can only select one port.
IP/MAC/PORT
The Intellinet Network Solutions Switch features IP-MAC-Port Binding. This is a powerful authentication
function that ensures the correctness of hardware (MAC address), software/user (IP address), and location
(Connected port) for devices connected to the network. This feature ensures they are all from legal sources
to prevent the data leakage from hackers faking the legal network devices.
Item Description
Binding Enable Check to activate IP Mac port binding.
Scanning Click to scan for connected network clients.
Binding Select the clients you wish to add to the IP Mac port binding table, then click on
“Binding”.
Application List All current, static IP-MAC-port binding entries are listed here. Note that this
information will be lost after the switch is restarted.
To Next Page
Loading...
Need help?
General
