Item Description
Server address Type in the address of the RADIUS server.
Charging port Type the accounting port number on the RADIUS server’s host computer. The
default port number is 1813.
Authentication port Type the accounting port number on the RADIUS server’s host computer. The
default port number is 1812.
Key The key parameter in the RADIUS-server command is used to encrypt RADIUS
packets before they are sent over the network. The value for the key parameter
on the switch device should match the one congured on the RADIUS server. The
default value is “radius”.
Active detection Enables or disables active detection of RADIUS server.
Test name The user name for active detection.
Idle time The interval time for RADIUS security server send message on accessible state.
The default value is 60 minutes. Possible values range from 0 to1440 minutes (24
hours).
AAA AUTHENTICATION
LOGIN AUTHENTICATION
Item Description
Choose a domain Select the ISP domain.
Login
Authentication
Check to activate it.
First – Fourth
Method
None: Eliminates the requirement for any authentication method.
Local: Uses the local password congured on the device to grant access.
Group RADIUS: Uses the list of all RADIUS servers for authentication.
Group TACACS+: Uses the list of all TACACS+ servers for authentication.
Custom Server Group: Uses authentication of a custom server group.