ADDRESS TABLE
In the navigation bar, select “Addr table” to adjust settings for MAC Management, MAC Learning and Aging
and MAC Filter parameters.
MAC MANAGEMENT
This section is used to add or delete static MAC and view the current MAC address table:
Parameter Description
Clear MAC
Options to clear the multicast MAC address, clear dynamic unicast MAC address,
clear static unicast MAC address, clear the specied MAC address, and MAC table
VLAN Options to add or delete VLAN ID, not create VLAN to create can only take eect
Example conguration:
To set the following options:
1) Port 6 MAC to static MAC.
2) Clear port 6 static MAC addresses.