Intellinet 561426 - How to Log In to the Switch

8
24-Port Gigabit Ethernet PoE+ Web-Managed Switch with
4 Gigabit Combo Base-T/SFP Ports
User Manual
HOW TO LOG IN TO THE SWITCH
As the switch provides Web-based management login, congure your computer’s IP address manually to log
on to the switch. The default settings of the switch are shown below.
Parameter Default Value
Default IP address 192.168.2.1
Default Username admin
Default Password 1234
Log on to the conguration window of the switch through following steps:
1. Connect the switch with the computer NIC interface.
2. Power on the switch.
3. Check whether the IP address of the computer is within this network segment: 192.168.2.xxx (“xxx”
range is 2-254); for example, 192.168.2.100.
Open the browser, and go to the URL http://192.168.2.1 to access the switch login window, as shown below.
Enter the Username and Password (the factory default Username is admin and the Password is 1234), and
then click “LOGIN” to log in to the switch conguration window as below.