ZeroWire Installation Manual 15
9.
Enter the month.
10.
Enter the year, it must be 4 digits.
11.
Exit from the menu.
Adjust Partition Entry or Exit Times
Example: Setting the entry time as 90 seconds
1.
Select main menu - Option 8, Basic system
configuration.
2.
Enter your Installer code.
3.
[2] Select partition entry time.
[3] Select partition exit time.
4.
Enter the new entry/exit time.
5.
Exit from the menu.
Configure Sensor Names
All sensors can be named using library words on page 50. This makes it easier to identify
the correct sensor in the event of a condition. You may enter up to eight words to achieve
your desired description.
Example: Configure sensor 1 name as “Dining Room Sensor”
1.
Select main menu - Option 8, Basic system
configuration.
2.
Enter your Installer code.
3.
Select sensor name recording.
4.
Select sensor 1.
5.
Select word “Dining” from the word library.
Select word “Room” from the word library.
Select word “Sensor” from the word library.
6.
Exit from the menu.
If you do not require all eight words, just press MENU as in step 6 after you have entered
the last word number.
MENU MENU MENU
ENTER 1 2 1
ENTER 7 1 1
ENTER 3 5
ENTER 1
4
ENTER
YOUR 4 OR 6 DIGIT INSTALLER CODE
8 MENU
MENU MENU MENU
ENTER 0 9
2
ENTER
YOUR 4 OR 6 DIGIT MASTER CODE
8 MENU
MENU MENU MENU
ENTER 4 1 0 2
ENTER 6
To Next Page
Loading...
Need help?
General
