42 ZeroWire Installation Manual
Using the App
The first screen that will appear once you connect is Arm/Disarm. This will display the
status of your system and allows you to arm or disarm partitions by touching Away, Stay,
or Off. From this screen you can also enable or disable Chime mode.
The menu bar is located along the bottom of the app. Touch Sensors to view sensor
status. From the Sensors screen you can touch Bypass to ignore a sensor or touch it
again to restore it to normal operation. You may also add or remove a sensor from the
Chime feature.
Partition 1
Partition 1
Partition 1
To Next Page
Loading...
Need help?
General
