Interlogix ZeroWire Installation Manual

ZeroWire Installation Manual 3
Front of ZeroWire
Key
Colour Description

ALARM
Red
System is in alarm. Enter your
PIN code then ENTER to turn off
the alarm. Press STATUS key for
more info.

STAY
Not lit
System is disarmed if Away is
also not lit. Press the STAY key
to arm in Stay mode.
Yellow
System is armed in the “STAY”
mode.

STATUS
Green
System is normal.
Yellow
Non-urgent system conditions
present. Press the STATUS key
to hear system conditions.
Red
(steady)
Urgent system conditions
present.
Touch the STATUS key to hear system
messages. If you are unable to fix the issue,
contact your service provider for help.

AWAY
Not lit
System is disarmed if Stay is also
not lit. Press the AWAY key to arm
in Away mode.
Red System is armed in the “AWAY”
mode.

READY
Not lit System cannot be armed, press
STATUS key for more info.
Key Colour Description

READY
Green
(steady)
A
ll sensors are ready and the
system can be armed in Away or
Stay mode.
Green
(flashing)
Sensors are currently unsealed but
system is force-armable. If these
sensors are not sealed by the end
of the exit time the system will go
into alarm.

BYPASS
Press the BYPASS key if you wish to isolate
(ignore) a sensor. Bypassed sensors will not
be active when you arm the system in Stay or
A
way modes.

CHIME
Press the CHIME key to select which sensors
will make a doorbell sound on the ZeroWire
when they are tripped.

HISTORY
Press the HISTORY key to listen for alarm
and event history.
FIRE
MEDICAL
POLICE
Feature must be enabled by your security
provider. Check what response will be
provided. Hold down the key to send a
message to a central monitoring centre.
Enter your PIN code then ENTER to turn off
a SOS alarm.

Interlogix ZeroWire Specifications

General

Brand	Interlogix
Model	ZeroWire
Category	Security System
Language	English