48 ZeroWire Installation Manual
UltraConnect App Status and Error Messages
Below you can find troubleshooting, status and error messages displayed on the
smartphone screen in the UltraConnect application.
Advanced/Settings Configuration menus
• "You must select a Menu before you can scroll" - An attempt was made to scroll up or down
from the top level menu.
• "Select a submenu from the list or select back to access the main menu" - An attempt was
made to scroll up or down from a submenu that has no additional levels.
• "Defaulting requires 2 levels" - a Shortcut was entered without two levels.
Read/write errors and results
• "Write Access Denied"
• "Nothing displayed can be Saved"
• "Program Success!"
• "Name Saved"
Sensors page
• "No Sensors Configured For Your Access" - Displayed on Sensors page when there are no
sensors available to view.
WiFi
• "Connection Was lost before a response was received" - Sent when no response received on a
WiFi network change.
Data entry formating errors
• "Data must only contain the following characters"
• "Date must be of the form YYYY-MM-DD."
• "Day must be from 1 to 31"
• "Data entry must only contain the numbers 0 - 9 and A-F"
• "Data entry must only contain the numbers 0 - 9"
• "Data must be a number from X to Y"
• "Improper Time Value"
• "must be 4 to 8 digits
• "You must enter a user Number between 1 and 1048575"
• "PIN digits must be between 0 and 9"
• "PIN Must be 4-8 digits from 0-9"
• "Data must not contain the following characters []"
To Next Page
Loading...
Need help?
General
