ZeroWire Installation Manual 47
System Status Messages
Various messages may appear on the Status screen of ZeroWire Web Server and
UltraConnect App. These are also announced by voice when the Status button is pressed.
System
• AC power fail – The security system has lost its electricity power
• Low battery – The security system’s back up battery requires charging
• Battery test fail – The security system’s back up battery requires changing
• Box tamper – The security system’s cabinet tamper input has activated
• Siren trouble – The security system’s external siren has a problem
• Over current – The security system is drawing too much current
• Time and date loss The security system time and date need resetting
• Communication fault – The security system has detected a problem with the phone line
• Fire alarm – A fire alarm has been activated from the ZeroWire unit
• Panic – A panic alarm has been activated from the ZeroWire unit
• Medical – A medical alarm has been activated from the ZeroWire unit
Partition Number. Partition Name
• Is On in the away mode – This partition is armed in the away mode
• Is On in the stay mode – This partition is armed in the stay mode
• Is ready – This partition is secure and ready to be armed
• Is not ready – This partition is NOT ready to be armed, a zone is not secure
• All partitions are on in the away mode – All partitions in this multi partition system are armed in
the away mode
• All partitions are on in the stay mode – All partitions in this multi partition system are armed in
the stay mode
• All partitions are ready – All partitions in this multi partition system are secure and ready to be
armed
Sensor Number. Sensor Name
• In Alarm – This zone has triggered a system alarm condition
• Is bypassed – This zone is isolated (disabled) and will not activate an alarm
• Chime is set – This zone is part of the chime group
• Is not secure – This zone is not closed
• Fire alarm – This zone has triggered a fire alarm
• Tamper – This zone has triggered a tamper alarm
• Trouble fault – This zone has an open circuit
• Loss of wireless supervision – This zone is a wireless device and has lost its communication
link with the control panel
• Low battery – This zone is a wireless device and needs its battery changed
To Next Page
Loading...
Need help?
General
