40 ZeroWire Installation Manual
4. Click Add.
5. Initiate LINK or ADD mode on Z-Wave device. See your Z-Wave device’s manual for
instructions.
6. Note: If a Z-Wave device has been added before or to another system, you must first
remove it before adding it to this system. To do this, click Remove, then activate LINK
or REMOVE mode on the device.
7. Click Rooms.
8. Check you can see the device you just added. Click a button such as ON or OFF to
verify you can control the device.
Access via UltraConnect App
UltraConnect is an app that allows you to control your ZeroWire from an Apple®
iPhone/iPad, or Google Android device. First set up the ZeroWire Web Server then
download this app. Carrier charges may apply and an Apple iTunes or Google account is
required.
To Next Page
Loading...
Need help?
General
