ZeroWire Installation Manual 1
Welcome
Thank you for purchasing ZeroWire!
ZeroWire can be set up in 4 steps and the voice guide will walk you through each
of the menus and settings.
1
Installyour
ZeroWire
2
Addyour
sensors
3
Addusers
&keyfobs
4
Customize
your
system
Instead of using the keys on the front of ZeroWire, you can also set up the
system with the built-in web server interface using a browser (see "ZeroWire
Web Server" on page 20).
Please read through this guide before starting the installation.
Features and benefits
• 255 Users – enough for even moderate sized businesses
• 64 Sensors + 25 Keyfobs – provides a large coverage area
• 8 Partitions – split your system into smaller parts you can protect individually
• Dynamic Key Lighting – lights up the available options to make it easier to
program
• Personal Voice Guide – steps you through customizing your system
• 2 Inputs – integrate non-wireless devices to your security system
• 2 Programmable Outputs – connect other devices such as siren and strobe
• Loud internal piezo siren – warns intruders they have been detected and
encourages them to leave quickly
• Modern self contained unit – all in one box
• Battery backup – your property is still protected if there is a loss of power
• 802.11 b/g WiFi – enables remote access via a web browser or smart phone
• IEEE 802.3 Compliant Ethernet – use hardwired cable instead of wireless, the
choice is yours
• 3G Cellular radio support – allows reporting alarm messages without a fixed
line telephone service
To Next Page
Loading...
