Interlogix ZeroWire Reference Guide

50 ZeroWire Reference Guide
Menu 8 - Actions
The ZeroWire features powerful automation control which can interact with
different parts of the system. It can perform functions based on the status of one
or more system conditions.
Each action has an on and off state. The state is controlled by up to 4 conditions
called Action Events, each of which can have a range of items.
Action
When all 4 Action Events are met, then the Action State will be set. The Action
State can be monitored by the main ZeroWire Panel, Schedules, Devices with
outputs, and Scenes to activate/deactivate.
For example, a strobe connected to Output 1 can be programmed to follow Areas
1-8 being armed.
Each Action can also directly control selected parts of your ZeroWire when all 4
Action Events are met. This is called the Action Result. Its behaviour also follows
the Action State.
For example, when all areas are armed and there is activity on zone 1, activate a
camera recording:
The main panel supports 32 actions. They have been pre-programmed in the
defaults to allow quicker programming. You may re-program any of these for
other use.
Event 1
Event 2
Event 3
Event 4
Action
State
and
or
=
Action
Result
and
or
and
or
+
Areas 1 – 8 All Armed
Action 1
TRUE
=
Output 1 Follow Action 1
Areas 1 – 8 Armed
Zone 1 Faulted
Action 1
TRUE
and
=
Camera 1
+

Interlogix ZeroWire Specifications

General

Brand	Interlogix
Model	ZeroWire
Category	Security System
Language	English