Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 89
2 For 8021x Security, choose PEAP.
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2
for association, or WEP or CKIP if you selected Network
EAP for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this
protocol.
7 Select Prompt for password to have the user enter this
password each time to access the protocol, or select Use
following password to use the protocol without entering a
password each time you use the CN3.
8 Tap Get Certificates to obtain or import server certificates.
For help with certificates, see “Loading a Certificate” on
page 99.
9 Tap Additional Settings to assign an inner PEAP
authentication and set options for server certificate validation
and trust.
10 From the Inner PEAP Authentication list, choose EAP/MS-
CHAP-V2, EAT/Token Card, or EAP/MD5-Challenge.
To Next Page
Loading...
