Chapter 3 — Configuring the Computer
90 CN3 Series Mobile Computer User’s Manual
11 Check Validate Server Certificate to verify the identity of the
authentication server based on its certificate when using
PEAP.
12 Tap Root CA, select a root certificate, and then tap OK.
13 Enter the Common Names of trusted servers.
14 Tap OK.
Configuring TLS Security With Profile Wizard
EAP-TLS is a protocol based on the Transport Layer Security
(TLS) protocol widely used to secure web sites. This protocol
requires both the user and authentication server to have
certificates for mutual authentication.
To configure TLS security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose TLS.
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2
for association, or WEP or CKIP if you selected Network
EAP for association.
5 For Subject Name, type a unique subject name for this
protocol.
To Next Page
Loading...
