Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 97
To configure Microsoft security
1 Select Start > Settings > the Connections tab > WiFi > Add
New.
2 Enter a Network name. If the network was detected, the
network name is entered and cannot be changed.
3 From the Connects to list, select where you want your
network to connect:
• If you select Work, you can create a VPN connection or
use proxy servers.
• If you select The Internet, you can connect directly to the
internet.
4 (Optional) To connect to an ad-hoc connection, select This is
a device-to-device (ad-hoc) connection.
5 Tap Next.
6 Follow these steps to disable authentication:
a Set Authentication to Open if WEP keys are not required
or to Shared when WEP keys are required for association.
b Set Data Encryption to Disabled.
To Next Page
Loading...
