Intermec SF51 User Manual

Chapter 2 — Configuring and Managing the SF51
14 SF51 Cordless Scanner User’s Guide
How to Configure the SF51 Parameters
You can configure many parameters on the SF51, such as the bar
code symbologies it decodes or the volume of the beeper. These
characteristics are controlled by configuration commands. The
values you set for these configuration commands determine how
the scanner operates.
You can configure the SF51:
• using EasySet version 5.4 or later either online or offline.
• remotely from your Intermec computer.
Configuring With EasySet
EasySet is an Intermec configuration application that provides
you with two ways to configure the SF51:
• Online: Send configuration commands directly to the SF51.
• Offline: Send configuration commands to a bar code setup
sheet. You can scan the bar codes onscreen with your SF51 or
print the setup sheet and scan the bar codes. You do not need
a Bluetooth connection to use this method.
To configure the SF51 online with EasySet
1 Establish a Bluetooth connection with your host PC. For
help, see the USB Bluetooth Adapter Instructions (P/N
074479).
2 Start EasySet version 5.4 or later. The first time you start
EasySet, the Select product dialog box appears.
If the Select product dialog box does not appear, choose
Product > Select.
3 Select the SF51.
4 Select the Online Setup check box, and click OK. The
Online Setup dialog box appears.
5 Select the COM port that your SF51 is using for Bluetooth
communications, and click OK.
EasySet connects to your SF51 and retrieves the current
configuration of the SF51.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g