Intermec SF51 User Manual

Chapter 2 — Configuring and Managing the SF51
18 SF51 Cordless Scanner User’s Guide
6 Scan both commands onscreen with your SF51, or print the
bar code setup sheet and scan both commands.
Note: For security reasons, you can only change
the Bluetooth PIN by scanning a bar code.
Configuring the Discoverable State of the SF51
By default, the SF51 is always discoverable. For enhanced
security, you should configure your SF51 for limited
discoverability, which allows the SF51 to be discoverable by
Bluetooth management applications for only 30 seconds. For
more information, see “Bluetooth Discoverable” on page 42.
To configure your SF51 for limited discoverability
• Scan this bar code:
Bluetooth parameters - discoverable - limited
\60\02\50\41\00\02\40
The SF51 is discoverable for 30 seconds.
Connecting the SF51 to a Host Device
You can use Bluetooth radio communications to connect the
SF51 to:
• an Intermec computer with a Bluetooth radio, such as the
700 Color Series (with Windows Mobile 2003 or later),
CK30, and CK60.
• a PC with a USB Bluetooth adapter (P/N 074892).
• other devices with a Bluetooth radio that support a Serial Port
Profile (SPP). For help, see the documentation for your
device.
Before connecting the SF51 to a host device, note the Bluetooth
address for the:
• host Bluetooth device.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g