EasyManuals Logo

Intermec SF51 User Manual

Intermec SF51
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Chapter 4 — Configuration Command Reference
54 SF51 Cordless Scanner User’s Guide
UPC/EAN
Enables or disables decoding of Universal Product Code
(UPC)/European Article Numbering (EAN) symbology.
UPC/EAN are fixed-length, numeric, continuous symbologies
that use four element widths. A scanner that is configured to
decode EAN bar codes can decode UPC, but the reverse is not
true. UPC code is a subset of EAN code.
ISBN
ISBN (International Standard Book Number) is a 10-digit
symbology that uniquely identifies books for tracking and
ordering.
With ISBN enabled, the first three characters (978) are ignored,
and the checksum is calculated on the remaining characters.
GTIN Processing
With GTIN (Global Trade Item Number) processing enabled,
two zeros are padded to the beginning of UPC-A, and one zero
is padded to the beginning of EAN-13 to expand the numbers to
14 digits. To use GTIN processing you also need to enable the
corresponding UPC/EAN symbology.
User Reset Factory Defaults
Causes the SF51 to perform a restart and restores all
configuration commands to their default settings, only if no
settings are locked. To reset all settings on the SF51, including
locked settings, use the Administrator Reset Factory Defaults
command. For more information, see “Administrator Reset
Factory Defaults” on page 40.
When you restore all configuration commands to their default
settings, you need to reestablish Bluetooth communications.
Vibrate Alert
Enables or disables the vibrate alert. When Vibrate Alert is
enabled, the scanner vibrates when you scan a valid bar code.
Vibrate Alert Duration
Sets the amount of time that the vibrate alert remains on. You
can set Vibrate Alert Duration to a value from 0 to 2550 ms.

Table of Contents

Other manuals for Intermec SF51

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec SF51 and is the answer not in the manual?

Intermec SF51 Specifications

Capacity and Output IconCapacity and Output
maximum output voltage4.1 V
mean output voltage3.7 V
capacity2400 mAh
Temperature and Humidity IconTemperature and Humidity
operating temperature range-20°C to 50°C
charging temperature range0°C to 35°C
storage temperature range-20°C to 60°C
recommended storage temperature21°C
humidity range0 to 95% non-condensing
Weight and Dimensions IconWeight and Dimensions
length73 mm
diameter19 mm
weight55 g

Related product manuals