Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
46 SF51 Cordless Scanner User’s Guide
Data Editing
Data editing allows you to edit data scanned by the SF51 before
it is transmitted to your host. You can define up to seven input
scenarios to filter out the data you want to edit. For more
information, see the EasySet software.
Disable All Symbologies
This command disables all symbologies. Disabling all
symbologies does not reset symbology parameters to their default
values. To reset all symbology parameters to their default factory
settings, use the Administrator Reset Factory Defaults
command. For more information, see “Administrator Reset
Factory Defaults” on page 40.
EAN.UCC Composite
Enables or disables EAN.UCC Composite symbology. An
EAN.UCC Composite symbol consists of a linear component
(encoding the item's primary identification) associated with an
adjacent 2D Composite Component (encoding supplementary
data, such as a batch number or expiration date). The
Composite symbol always includes a linear component so
that the primary identification is readable by all scanning
technologies, and so that 2D imagers can use the linear
component as a finder pattern for the adjacent 2D Composite
Component.
Error Beep
Enables or disables the error beep. When you scan a
configuration bar code that is damaged or unknown, you
hear an error beep, and the configuration of the SF51 is not
changed.
Good Read Beep Duration
Sets the length of the SF51 good read beeps. You can set Good
Read Beep Duration to a value from 0 (off) to 2550 ms.
Use Good Read Beep Duration in combination with Beep
Volume and Beep Frequency to define beeps according to
operator preference and work environment.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g