Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
SF51 Cordless Scanner User’s Guide 43
Bluetooth Security
Enables or disables Bluetooth security. When Bluetooth
security is enabled, you need to enter the SF51 Bluetooth PIN
before you can use the scanner. For more information, see
“Configuring Security” on page 17.
Codabar
Enables or disables decoding of Codabar symbology. Codabar
is a self-checking, discrete symbology. The American Blood
Commission (ABC) Codabar requires that you retain and
transmit the start/stop code digits when processing a Codabar
symbol. As a result, configuration CD10 is an illegal
configuration.
Codablock A
Enables or disables decoding of Codablock A symbology.
Codablock A is a 2D bar code that is an extension of Code 39.
If Code 39 is enabled with check digit, you cannot enable
Codablock A. For best results, disable Code 39 before you
enable Codablock A. If Code 39 is enabled with check digit,
Codablock A will not be decoded properly.
Codablock F
Enables or disables decoding of Codablock F symbology.
Codablock F is a 2D bar code that is an extension of Code 128.
If Code 128 is enabled with check digit, you cannot enable
Codablock F. For best results, disable Code 128 before you
enable Codablock F.
Code 11
Enables or disables decoding of Code 11 symbology. Code 11 is
a very high-density, discrete numeric bar code. It is most
extensively used in labeling telecommunications components
and equipment.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g