Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
42 SF51 Cordless Scanner User’s Guide
Bluetooth Discoverable
Determines the discoverable state of the SF51. When the SF51
is discoverable, it is visible to other Bluetooth devices in
communication range.
Bluetooth Discoverable States
State Description
Fully The SF51 is discoverable to Bluetooth management
applications.
Limited The SF51 is discoverable to Bluetooth management
applications for 30 seconds.
Not The SF51 is not discoverable to Bluetooth management
applications.
Note: The SF51 is not discoverable when it is
connected to a host device.
Bluetooth PIN
When Bluetooth security is enabled, the Bluetooth PIN is
used to authenticate the Bluetooth link and encrypt the data.
Depending on the Bluetooth software on your host device, you
should only need to enter the Bluetooth PIN the first time you
connect and pair the SF51.
For help configuring a Bluetooth PIN, see “Configuring
Security” on page 17.
Bluetooth Profile
Configures the SF51 to connect to a host device through
the Serial Port Profile (SPP) Bluetooth communications profile.
SPP allows the SF51 to use the Bluetooth link as a serial port to
communicate with the host device.
For more information, see “Configuring Bluetooth
Communications” on page 17.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g