Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
SF51 Cordless Scanner User’s Guide 37
Configuration Commands By Function
The configuration commands are grouped by function and
reflect the organization of the Commands window in EasySet.
Reset All Parameters
Command Default Value See Page
Administrator reset factory
defaults
N/A 40
User reset factory defaults N/A 54
Data Transmission Settings
Bluetooth Command Default Value See Page
Bluetooth security Active 43
Bluetooth PIN 0000 42
Bluetooth discoverable Fully discoverable 42
Bluetooth profile Serial port profile
(SPP)
42
Bluetooth device name SF51 Scanner
<Bluetooth Address>
41
Bluetooth
connect/disconnect
Disconnect 41
Data Transmission
Command Default Value See Page
Data editing N/A 46
Postamble <CR><LF> 48
Preamble None 48
Symbology identifier Not transmitted 50

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g