Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
50 SF51 Cordless Scanner User’s Guide
Symbology Identifier
Symbology identifiers allow you to indicate what type of data is
being sent by prepending an identifier to the data. You can
prepend one of the following types of character strings to
identify which symbology the data is using.
Symbology Identifier Options
Character
String Description
AIM ISO/IEC
standard
The AIM Standard for symbology identifiers
consists of a three-character structure indicating
the symbology and the optional features of the
symbology. For more information about the AIM
Standard for symbology identifiers, refer to the
AIM ISO/IEC Standard.
User-defined
ASCII
character string
The user-defined symbology identifier (UDSI) is
one to four ASCII characters in length. You can
configure user-defined symbology identifiers to
assign custom identifier strings to the bar code
symbologies.
Code Mark The code mark identifier is a single character user-
defined symbology identifier. Its value can range
from 0x00 to 0xFF.
Telepen
Enables or disables decoding of Telepen symbology. Telepen is
the only symbology to directly represent the full ASCII character
set without shift characters. It is extremely secure as it has
negligible risk of misreads and has a double density numeric
only mode.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g