Intermec SF51 User Manual

Chapter 3 — Troubleshooting and Maintaining the SF51
SF51 Cordless Scanner User’s Guide 33
Cleaning the SF51
To keep the SF51 in good working order, you may need to
clean the scanner window. Clean the scanner window as often
as needed for the environment in which you are using the SF51.
To clean the scanner window, you can use soapy water, a
solution of ammonia and water, or isopropyl alcohol.
Opening the SF51 will void the warranty and may
cause damage to the internal components.
To clean the scanner window
1 Dip a clean towel or rag in soapy water, ammonia and water
solution, or isopropyl alcohol and wring out the excess. Wipe
the scanner window. Do not allow any abrasive material to
touch the window.
2 Wipe dry with a lint-free cloth.

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g