Intermec SF51 User Manual

Chapter 4 — Configuration Command Reference
SF51 Cordless Scanner User’s Guide 39
Operating Settings
Trigger Activation
Command Default Value See Page
Trigger mode Level 52
Trigger timeout 2 sec 53
Turn off after good read Active 53
Data Decoding
Security Command Default Value See Page
Consecutive same read
data validation
Auto read count
before transmission
45
Timeout between identical
consecutive codes
300 ms 51
Timeout between different
consecutive codes
None 51
Beeps/Green Indicator LED
Command Default Value See Page
Beep volume High 41
Note (Beep frequency) 2610 Hz 40
Good read beeps
Number 1 47
Duration 80 ms 46
Timing After transmission 47
Good read LED duration 2000 ms 47
Error beep On 46
Setup beep On 49
2D symbologies
Stacked code crackle On 49
Vibrate alert
Vibrate alert Off 54
Duration 300 ms 54

Intermec SF51 Specifications

Capacity and Output

maximum output voltage	4.1 V
mean output voltage	3.7 V
capacity	2400 mAh

Temperature and Humidity

operating temperature range	-20°C to 50°C
charging temperature range	0°C to 35°C
storage temperature range	-20°C to 60°C
recommended storage temperature	21°C
humidity range	0 to 95% non-condensing

Weight and Dimensions

length	73 mm
diameter	19 mm
weight	55 g