Interroll RollerDrive EC5000 AI - Safety-related information; State of the art; Proper use

10 of 54
Version 2.4 (03/2020) Online
Translation of the original operating manual
Safety-related information
2 Safety-related information
2.1 State of the art
The RollerDrive EC5000 has been constructed with respect to applicable standards and the current state of the art
and has been delivered in a condition that is safe to operate. Nevertheless, hazards can occur as a result of use.
Non-compliance with the instructions in this operating manual can result in life-threatening injuries.
In addition, the applicable local accident prevention regulations for the area of application and general safety
regulations must be adhered to.
2.2 Proper use
The RollerDrive may only be used in an industrial environment for industrial purposes within the stipulated
performance limits that are given in the technical specications.
It must be integrated into a conveyor unit or conveyor system before commissioning.
Application eld
Drive for unit load conveyor technology, such as for the transportation of cardboard boxes, containers, barrels,
workpiece carriers or tyres.
The RollerDrive is suitable for:
• Zero-pressure roller conveyors
• Entry conveyors
• Roller conveyor curves
• Small belt conveyors
Depending on the area of application of the RollerDrive, PolyVee, round or toothed belts as well as chains can be
used for the power transmission.