Version 2.4 (03/2020) Online
Translation of the original operating manual 23 of 54
Product information
3.6 Product identication
The following information is required to identify the RollerDrive:
Information Possible value Own value
RollerDrive
Rating plate
Motor type
Gear ratio
Serial number
Mechanical power
Supply voltage
Analogue/CAN bus
Tube diameter 50 mm, 60 mm
Tube material Stainless steel
Zinc-plated steel
Chromium-plated steel
Aluminium
Tube sleeve PVC hose 2 mm, 5 mm
PU hose 2 mm
Rubber coating 2–5 mm
Tapered elements 1.8°, 2.2°
Installation length
RollerDrive
Installation length
Drive element on the non-cable side PolyVee drive head
Round belt:
Two grooves
Round belt head
Toothed belt drive head
Sprocket drive head
Attachment on the non-cable side Hexagonal spring shaft
Internal thread attachment
Hexagonal spring shaft, conical
(See „Dimensions of the bearing
housings on the non-cable side“ on
page 36)
To Next Page
Loading...
