Interroll RollerDrive EC5000 AI - Dimensions of the motor shaft; Dimensions of the bearing housings on the non-cable side

36 of 54
Version 2.4 (03/2020) Online
Translation of the original operating manual
Product information
3.12 Dimensions of the motor shaft
Version with degree of protection IP54 Version with degree of protection IP66
RL = Reference length/order length
EL = Installation length, clearance between the side proles
3.13 Dimensions of the bearing housings on the non-cable side
PolyVee drive head with 11 mm hexagonal spring shaft PolyVee drive head with M8 internal thread attachment
Round belt drive head with 11 mm hexagonal spring
shaft
Round belt drive head with M8 internal thread
attachment