Interroll RollerDrive EC5000 AI - Translation of the original Declaration of Conformity

Version 2.4 (03/2020) Online
Translation of the original operating manual 53 of 54
Appendix
10.2 Translation of the original Declaration of Conformity
EU Declaration of conformity
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
In addition to the information specied above, the manufacturer declares that:
The health and safety requirements have been applied in accordance with Annex I (1.1.2, 1.1.3, 1.1.5, 1.2.6, 1.3.7, 1.3.8,
1.5.1, 1.5.2, 1.5.4, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.6.1, 1.6.3, 1.7.2, 1.7.3, 1.7.4). The relevant technical documentation has
been compiled in accordance with Annex VII B and has been passed on to the relevant authorities where applicable.
The commissioning of the incomplete machine is prohibited until the conformity of the overall
machine/system in which it is installed with the EC Machinery Directive has been declared.
Authorised for compiling technical documentation:
Interroll Engineering GmbH, Höferhof 16, 42929 Wermelskirchen, Germany
Jörg Schier
Product Compliance Ocer Interroll Engineering GmbH
Wermelskirchen, 24.01.2019
Declaration of incorporation
EC Machinery Directive 2006/42/EC
The manufacturer
Interroll Engineering GmbH
Höferhof 16
42929 Wermelskirchen
Germany
hereby declares that the "incomplete machine"
• RollerDrive EC5000
conforms to the applicable provisions and the associated CE marking in accordance with the
aforementioned Directives.
List of the coordinated standards that have been applied:
EN ISO 12100:2010
EN 61800-3:2004 + A1:2012