Version 1.02 | Fieldbus Guide | 39www.invertekdrives.com
8
Ethernet/IP Communication
Step 7.
Assign the drive name, confi gure the Assembly Instances and
sizes for ODE3 Extended Telegram
Step 8.
Device should be added under the CIP Bus
Step 9.
Tags for the ODE3 drive are created int the Controller Tags window
Confi guration for Assembly Instances and Size for ODE3 Extended Telegram (4 Words In & 16 Words Out) are as below:
Device Settings
Data Type INT 16-bit
Address 1 -
Connection Parameters
Assembly Instance Size
Input 2001 16
Output 1 4
Confi guration 2 0
NOTE
1. Assembly Instance is the Modbus Register number which can be found in the drive Parameter List / Programming guide document.
2. Device Address must be set to 1 and be equal to the drive local address.
Tags for the ODE3 drive are created int the Controller Tags window
Confi guration for Assembly Instances and Size for ODE3 Extended Telegram (4 Words In & 16 Words Out) are as below:
To Next Page
Loading...
