INVT DA180-S2R8SG0 User Manual

DA180 series basic AC servo drive Overview
-4-
DA180 series servo drive (100W–1kW)
Specification
Description
Speed
command
filter
First-order delay filter from the analog input speed
command.
Speed
command
zero-drift
control
Zero-drift suppression on external interference.
Torque
control
Control input
Such as zero-drift clamping input.
Control
output
Such as speed reaching.
Analog input
Torque
command
input
This allows gain and polarity settings based on
analog voltage.
Speed
limit input
This allows analog speed limits.
Speed limit
Speeds can be limited through parameter settings.
Torque
command
filter
First-order delay filter of the analog input speed command.
Torque
command
zero drift
Zero-drift suppression on external interference.
Internal
position
planning
Segment
planning
This supports 128-segment internal position planning. The
positioning can be controlled through communication.
Route setting
1: Position
2: Speed
3: ACC time
4: DEC time
5: Stop timer
6: Status output
7: Running mode
Homing
1: LS signal
2: Phase-Z signal
3: LS signal + phase-Z signal

INVT DA180-S2R8SG0 Specifications

General

Brand	INVT
Model	DA180-S2R8SG0
Category	Servo Drives
Language	English