INVT Goodrive35 Series - Page 94

Goodrive35 Series Closed-loop Vector Control VFD Function parameters
87
Functio
n code
Name
Detailed instruction of parameters
Default
value
Modif
y
P07.20
Rated VFD current
0.1–6000.0A
●
P07.21
Factory barcode 1
0x0000–0xFFFF
●
P07.22
Factory barcode 2
0x0000–0xFFFF
●
P07.23
Factory barcode 3
0x0000–0xFFFF
●
P07.24
Factory barcode 4
0x0000–0xFFFF
●
P07.25
Factory barcode 5
0x0000–0xFFFF
●
P07.26
Factory barcode 6
0x0000–0xFFFF
●
P07.27
Current fault type
0: No fault
1: Inverter unit phase protection (OUt1)
2: Inverter unit V phase protection (OUt2)
3: Inverter unit W phase protection (OUt3)
4: ACC overcurrent (OC1)
5: DEC overcurrent (OC2)
6: Constant-speed overcurrent (OC3)
7: ACC overvoltage (OV1)
8: DEC overvoltage (OV2)
9: Constant-speed overvoltage (OV3)
10: Bus undervoltage (UV)
11: Motor overload (OL1)
12: VFD overload (OL2)
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
15: Overheat of the rectifier module (OH1)
16: Overheat fault of the inverter module (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotune fault (tE)
21: EEPROM operation fault (EEP)
22: PID response offline fault (PIDE)
23: Brake unit fault (bCE)
24: Running time arrival (END)
25: Electrical overload (OL3)
26: Panel communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
●
P07.28
Type of the last fault
●
P07.29
Type of the last but
one fault
●
P07.30
Type of the last but
two fault
●