Iomega px4-400d User Manual

Managing iSCSI Drives
Adding CHAP User Access to an iSCSI Drive
After you add an iSCSI drive, you create a list of CHAP users that have access to an iSCSI drive. These
users are independent from the users you create on your px4-400d.
1. On the iSCSI page, expand an iSCSI drive, and expand iSCSI CHAP Users to add user access
to an iSCSI drive.
2. Click Add a CHAP user and enter a CHAP username and password.
3. Click Create. Continue adding as many users as needed to access the drive.
4. To delete a user, expand the user section and click Delete.
iSCSI: Creating IP-Based Storage Area Networks (SAN)
91 Managing iSCSI Drives

Iomega px4-400d Specifications

General

Brand	Iomega
Model	px4-400d
Category	Storage
Language	English