Iomega px4-400d User Manual

Security Settings
Only administrator users can view or change settings on the px4-400d, To change any security settings,
you must login to the device management interface as an admin user.
1. Click the Security icon to open the Security settings page.
2. Set the encryption options you want to use.
Local Encryption enforces encryption on your local network.
Remote Encryption enforces encryption outside your local network, such as through the
internet,
Choices for both encryption types are Not required and Always (encryption is always enforced).
Always encrypting communication is safest, but can impact performance.
Encryption is always available when you access your px4-400d using https.
3. If you have your own security certificate, you can load it by selecting Use an imported certificate
and browsing to the certificate to load it.
Browser communications with the px4-400d are encrypted as part of the built-in security on
the device. If you do not have your own security certificate, each computer that attempts
to access the px4-400d may encounter a security warning, which can be safely ignored. In
addition, you may be asked to accept a signed certificate for the px4-400d , which you
should accept. If you change the device name at a later date, these warnings may appear
again.
4. Click Apply to save your changes.
5. Click here to learn how to create users on the device.
6. Click here to learn how to change access permissions for device Shares.
Securing Your px4-400d Network Storage and Contents
Security Settings 35

Iomega px4-400d Specifications

General

Brand	Iomega
Model	px4-400d
Category	Storage
Language	English