Connecting the px4-400d to Your Network
Check Package Contents
Verify that the box contains the following items:
● px4-400d (models may vary)
● Power Adapter and Cord
● Quick Start Guide
● Ethernet Cable
Package contents may vary.
Connecting the px4-400d
If you have purchased more than one px4-400d, complete all steps on one device before setting up
additional devices.
1. Make sure at least one hard drive is installed in the px4-400d. Refer to
http://support.lenovoemc.com for a list of drives approved for use with the px4-400d.
2. Use the included network cable to connect the px4-400d to your network router, switch, or hub.
Setting up Your px4-400d Network Storage
6 Connecting the px4-400d to Your Network
To Next Page
Loading...
