Device Setup
Device Setup runs automatically when you first access the px4-400d and steps you through configuring
basic device options. If you want to change these configuration settings later on, you can run setup again
by selecting the Device Setup icon under All Features in the px4-400d device management console.
You can also manually configure options for any feature on your px4-400d by selecting that feature's icon.
Other sections in this manual provide information on settings options for the features available on your px4-
400d.
If you run Device Setup after completing initial setup, it will not affect any content stored on your
px4-400d or change other configuration options you have set.
Some processes on your px4-400d also use the setup steps to confirm administrator authorization
and configure basic storage options, such as file system and RAID protection. This will not affect
other settings or data on your px4-400d.
Setting up Your px4-400d Network Storage
Device Setup 13
To Next Page
Loading...
Need help?
General