Iomega px4-400d User Manual

Energy Saving
The Energy Saving feature provides power settings for the px4-400d.
Power Down Drives
Click the Power Down Drives drop-down menu to select how much idle time should be allowed to elapse
before the px4-400d powers down the drives. Drives automatically power back up when the px4-400d
accesses them. You may notice a slight delay when the drives are accessed.
Brightness
To adjust the brightness of the lights on the px4-400d, set the Indicator Brightness to High, Medium, or
Low.
Wake On LAN
Wake On LAN powers on your px4-400d when a specific signal is sent over the network. Additional
software may be required to send the Wake On LAN signal to your device.
1. Check the Wake On LAN checkbox to enable Wake On LAN.
2. Click Apply to save your changes.
Creating a Power Schedule
You can create a power schedule for your px4-400d. This allows you to set daily times to automatically
power off and/or power on the device.
1. Check the box next to Enable device power schedule.
2. Check the boxes for Power Off and/or Power On.
3. Set the power schedule time in both hours and minutes (HH:MM), and specify AM or PM.
4. Click Apply to save your changes.
Hardware Management
143 Energy Saving

Iomega px4-400d Specifications

General

Brand	Iomega
Model	px4-400d
Category	Storage
Language	English