EasyManuals Logo

Iomega px4-400d User Manual

Iomega px4-400d
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Safety Information
Observe the following guidelines when using your px4-400d Network Storage:
Follow all instructions marked on the px4-400d and in the documentation.
Use only the power supply provided with the px4-400d.
Unplug the px4-400d before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
Do not use the px4-400d near water. Do not spill liquid on or into the px4-400d.
Do not place the px4-400d on an unstable surface.
Do not place the px4-400d near or on a radiator or heat register.
Openings in the px4-400d are provided for fans and air ventilation and should not be blocked or
covered. Make sure the px4-400d has ample ventilation (at least 6 inches or 127 mm) in front and
behind the unit.
Do not walk on the power cord or allow anything to rest on it.
There is a danger of explosion if the coin cell lithium battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment manufacturer. Dispose of used
batteries according to local, state, regional, and federal regulations.
Under any of the following conditions, unplug the px4-400d from the wall outlet and contact technical
support:
The power cord or plug is damaged.
Liquid has been spilled into the device.
The device does not function properly when the operating instructions are followed.
The device was dropped or the exterior enclosure is damaged.
Setting up Your px4-400d Network Storage
8 Safety Information

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iomega px4-400d and is the answer not in the manual?

Iomega px4-400d Specifications

General IconGeneral
BrandIomega
Modelpx4-400d
CategoryStorage
LanguageEnglish

Related product manuals