Further technic
al details
ipEther232
OEM Version Desktop Din-Rail-Unit
1 x RS232 or 1 x RS485 – SUB-D9 (Full RS232)
Baudrate: 2.400 TP 115.200 baud
Parity: None, Even, Odd, Mark, Space
Data: 8 Bits
Stop: 1 or 2 Bits
Interfaces
1 x 10BaseT – RJ45 (may be operated in 10/100 MBit/s networks)
Diagnosis (LED)
Power, System, Error,
RS232 bzw. RS485 Send/Receive,
Ethernet Send/Receive/Link
Supply voltage
+ 8 - 14 V DC – ack 5 V I t Jnpu
DC on-board connector
+ 8 - 14 V DC – Input Jack
+ 8 - 14 or 24 V DC
1)
Input Jack and
3,5mm connector
Housing Without housing Plastic housing Plastic housing
Dimensions W/H/D Approx. 10 m 0/20/70 m Approx. 110/30/75 mm Approx. 45/108/73 mm
Operating / storage temperat e ur 5° C to 55° C / -10° C to 70° C
Relative humidity 5 % to 90 % non condensing
Standards CE
ipEther232
Without power supply
External power supply input: 230
V AC Output: 9 V DC
Without power supply
Configuration software
Driver for Windows (NT, 2000, XP)
Scope of delivery
Documentation (German or English)
RS232 0202014-OEM 0202014 0202014-H
Order number
RS485 0202015-OEM 0202015 0202015-H
1)
Further voltages on request
2)
Delivery only at countries with 230
V AC 50Hz
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 45 von 150
To Next Page
Loading...