RS232:
Baud rate, databits, parity and stopbits are adjusted to the communication
behavior of the serial terminal device.
"Total Timeout": In most of cases the applied default value is 100 ms. The "ping"
tool assists in determining the ideal throughput time (see below) or with the dialog
“INet Info”.
"Character Distance" with a default value of 5 ms requires adjusting only in very
rare cases.
Throughput time + 10ms = ideal “Total Timeout“
here < 10ms + 10ms = 20ms
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 56 von 150
To Next Page
Loading...