ITech IT7900P Series - Demo Software Introduction

Inspection and Installation
Copyright ©ITECH Electronic Co., Ltd. 146
CURRent:PROTection:PEAK 270 //Set the current Peak protect value to
270A
OUTPut ON //Turn on/off the output
MEASure:VOLTage? //Measure the output Vrms
MEASure:CURRent? // Measure the output Irms
MEASure:POWer? // Measure the output power
SYSTem:ERRor? //Query the error information of the instrument
SYSTem:CLEar // To clear the error queue
OUTPut:PROTection:CLEar //To clear the protection status
10.7 Demo Software Introduction
IT7900 series AC/DC power supply provides the following computer control
software, convenient for users to achieve different test control.The standard
version of the software can be downloaded from the official website, and the
optional version of the software needs to be purchased separately.
⚫ PV7900P Demo Software(Standard)
IT7900 series power supply supporting remote control software, users can
directly obtain the software from ITECH agent and install to the PC, to achieve
remote control equipment by visualization method, IT9000-PV7900 software
can achieve all the instrument panel operation. And the interface is simple and
convenient to operate. For detailed introduction, please refer to IT9000-PV7900
Software Manual.
⚫ ASS4000 Avionic & Shipboard Software(Optional)
IT7900 series power supply supporting ASS4000 series software to achieve
complex aviation, Marine and IEC regulatory certification testing, through the
software interface engineers can choose IEC61000-4-11, 4-13, 4-14, 4-28,
MIL704 and ABD regulations.