Source Mode Operation
Copyright ©ITECH Electronic Co., Ltd. 68
5.18 Standard IEC Regulations
IT7900P series AC/DC power supplies provide standard test curves in
accordance with IEC 61000-4-11/4-13/4-14/4-28 regulations. It can be invoked
directly by the user when testing IEC compliance tests.
This function provides both the test curve that meets the standard requirements
of regulations and the curve customization function. Users can customize the
curve according to the project requirements of regulations and perform the
extended test of the test object.
Click Standard on the Menu screen directly press Shift+ (Standard)
to enter the regulation test screen.
NOTE
For parameters of corresponding curves and related regulations, refer to
IEC standards.
To Next Page
Loading...
