ITech IT7900P Series - Touch Screen Operation

Getting Started
Copyright ©ITECH Electronic Co., Ltd. 37
Char
Function description
Char
Function description
LIST function is waiting for
trigger
Sweep function is
waiting for trigger
Sweep running indicator
Found USB disk
Sense indicator
Sense Error
Over voltage protection
Over temperature
protection
AC/AC+DC mode
Peak OCP
AC/AC+DC mode
RMS OCP
Over power protection
Fiber is error
SYNC unlock
SYNC lock
Current Negative
Voltage sample mode
Menu Introduction
Press the [Menu] key on the front panel and enter to the menu interface. Menu
interface will display all of function icon, user can rotate the knob or direction key
to select, or click the screen to enter the function interface.
4.3 Touch Screen Introduction
This series of power display is a touch screen LCD interface, users can select
and set parameters by hand touch.The touch function can be set in the system
menu.
Touch screen drag and corresponding functions are described as below.
Convenient user quickly understand how to use this power supply.