Method of step jumps to next step.
Time: when the time is out, jumps to next step
Trig: receive a trigger signal, jumps to next step.
Phase: jumps to next step at this phase.
4. Press [Esc] to return Edit interface, Press [Save].
At list Edit interface, click the step number, the [Insert]/[Paste]/[Cut]/[Copy]
/[Delete] will display, click the key to edit.
5. Press [Esc] to return.
6.12.2 Select/Run List File
If several List files are edited, press Recall to recall the List file to be tested.
Detailed operation steps are as below:
1. Press [Shift]+[V-set](list) on the front panel to enter the List function
configuration interface.
2. Press [Open], select the saved List01 csv file, and press [Enter] to enter the
file.
3. Press [On/Off] on the front panel, turn on the input.
4. Press [Run] in the list function interface.
5. Running indicator will appear in interface.
6. Press [Scope] key to view the input waveform.
6.12.3 Import/Export List file
Import List file
IT8200 series support import list file function, The user can finish the editing of
List file in Excel and import it into the software. This function simplifies the List
file edit and facilitates user operation.
To help user define an Excel file format, please export a CSV template from the
List interface.
Detailed operation steps are as below:
1. Create a new Excel document on local PC and name it List02.
2. Open the Excel document and save it as in “other formats” i.e. “(*.csv)”.
3. Open the List02.csv document and edit the List. Set every step of the List
and corresponding parameters and save the document in the USB disk.
List import file formats under single-phase mode:
To Next Page
Loading...
Need help?
General
