iteco IT 10151 - General Recommendations - Safety Rules; Safety Systems; Adhesive Labels and Plates

11
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
General recommendations - safety rules
The aim of this handbook is to help the operator to well know the
platform for an eective use under maximum safety conditions; it is
for this reason that it is very important to read and well understand
this handbook.
Safety systems
The safety systems foreseen for the machine are inevitably subjected
to wear and to be put out of tune. Check them periodically and keep
them in an ecient way. When the operative and safety conditions
are checked, do not base on their working solely.
These safety devices, being installed on the machine, don’t relieve the
Operator from the responsibility to use the machine adequately and
carefully .
Remove, modify or tamper important self-propelled aerial platform
instruments is strictly forbidden in order to assure its safety and sta-
bility.
Particular aention must be paid to the baeries which also carry
out a stabilising function. Check that their weight equals, or exceeds,
that given in the table of machine specications before making any
replacements.
Any tampering of the main instruments and safety devices of the
aerial self-propelled platform could cause the immediate lapse of the
guarantee terms.
Adhesive labels and plates
Possible dangers and prescriptions concerning the machine are de-
scribed on labels and plates ; therefore it is important that these are
well readable and in good conditions.