71
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Check oil level
The oil level checking and the possible topping up should be made
when the platform is entirely lowered.
Take away oil tank cap being in the hydraulic control unit; should it
is necessary top up with oil of the same viscosity as indicated on the
tank.
A cap is located under the tank for total oil discharge.
•Discharge all oil from tank.
•Close discharge cap.
•Fill in new oil through lling cap.
Hydraulic oil is a polluting product.
Avoid uid leakages by using collection tanks and take precautions
against accidental leakages by resorting to oil-absorbing products.
Exhausted oil must be collected and not disposed of into normal
discharge lines; specialized rms aend to dispose of or possibly
recycle industrial oils, under the laws prevailing in each individual
state.
To Next Page
Loading...
